• Lorem ipsum

Products tagged with Grove Module

Article code 101020010
€5,75
(€6,96 Incl. tax)
This Grove - ultrasonic sensor is a non-contact distance measurement module which is compatible with the Grove system. Read more
Ultrasonic Ranger
This Grove - ultrasonic sensor is a non-contact distance measurement module which is compatible with the Grove system.
€5,75
(€6,96 Incl. tax)
Article code 101020014
€4,25
(€5,14 Incl. tax)
The Light sensor module uses the GL5528 photoresistor to detect the light intensity of the environment. Read more
Light Sensor
The Light sensor module uses the GL5528 photoresistor to detect the light intensity of the environment.
€4,25
(€5,14 Incl. tax)
Article code 101020063
€9,00
(€10,89 Incl. tax)
The Grove - Loudness Sensor is designed to detect the loudness of environmental sound. Read more
Loudness Sensor
The Grove - Loudness Sensor is designed to detect the loudness of environmental sound.
€9,00
(€10,89 Incl. tax)
Article code 101020027
€8,00
(€9,68 Incl. tax)
The Electricity sensor module is based on the TA12-200 current transformer which can change large alternating current into a small amplitude. You can use it to test large alternating current upto 5A. Read more
Electricity Sensor
The Electricity sensor module is based on the TA12-200 current transformer which can change large alternating current into a small amplitude. You can use it to test large alternating current upto 5A.
€8,00
(€9,68 Incl. tax)
Article code 101020078
€15,00
(€18,15 Incl. tax)
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. Read more
Air Quality Sensor
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases.
€15,00
(€18,15 Incl. tax)
Article code 105020002
€15,00
(€18,15 Incl. tax)
The LED Strip Driver with 4-pin Grove interface provides easy connectivity to your standard Arduino device or Seeed Stalker. Read more
LED strip driver
The LED Strip Driver with 4-pin Grove interface provides easy connectivity to your standard Arduino device or Seeed Stalker.
€15,00
(€18,15 Incl. tax)
Article code 103020008
€6,00
(€7,26 Incl. tax)
Grove – MOSFET enables you to control higher voltages (15VDC) with low voltage (5V) on a microcontroller. Read more
MOSFET
Grove – MOSFET enables you to control higher voltages (15VDC) with low voltage (5V) on a microcontroller.
€6,00
(€7,26 Incl. tax)
Article code 101020070
€25,00
(€30,25 Incl. tax)
Grove - NFC Tag is a highly integrated Near Field Communication Tag module. This unique module is I2C interface, which is based on the M24LR64E-R which has a 64-bit unique identifier as well as a 64 -Kbit EEPROM. Read more
NFC Tag
Grove - NFC Tag is a highly integrated Near Field Communication Tag module. This unique module is I2C interface, which is based on the M24LR64E-R which has a 64-bit unique identifier as well as a 64 -Kbit EEPROM.
€25,00
(€30,25 Incl. tax)
Article code 101020009
€6,00
(€7,26 Incl. tax)
Line finder is designed for line following robotic. It consists two parts - an IR emitting LED and an IR sensitive phototransistor. It can output digital signal to a microcontroller so the robot can reliably follow a black line on a white background,... Read more
Line Finder
Line finder is designed for line following robotic. It consists two parts - an IR emitting LED and an IR sensitive phototransistor. It can output digital signal to a microcontroller so the robot can reliably follow a black line on a white background,...
€6,00
(€7,26 Incl. tax)
Article code 104030008
€22,00
(€26,62 Incl. tax)
The Grove - OLED 128×64 Display module is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface. Read more
OLED 128x64 Display
The Grove - OLED 128×64 Display module is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface.
€22,00
(€26,62 Incl. tax)
Article code 101020037
€6,00
(€7,26 Incl. tax)
This is a simple touch sensor module. You can use it to replace a traditional push button. Read more
Touch Sensor
This is a simple touch sensor module. You can use it to replace a traditional push button.
€6,00
(€7,26 Incl. tax)
Article code 105020003
€4,25
(€5,14 Incl. tax)
This is a mini vibration motor module which is suitable as a non-audible indicator. When the input is HIGH, the motor will vibrate just like your cell phone on silent mode. The motor is very easy to use and Grove compatible. Read more
Vibration Motor
This is a mini vibration motor module which is suitable as a non-audible indicator. When the input is HIGH, the motor will vibrate just like your cell phone on silent mode. The motor is very easy to use and Grove compatible.
€4,25
(€5,14 Incl. tax)
Article code 101020018
€4,25
(€5,14 Incl. tax)
This sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sense traces. Read more
Water Sensor
This sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sense traces.
€4,25
(€5,14 Incl. tax)
Article code 101020047
€10,00
(€12,10 Incl. tax)
The Grove - Flame Sensor can be used to detect fire source or other light sources of the wavelength in the range of 760nm - 1100 nm. Read more
Flame Sensor
The Grove - Flame Sensor can be used to detect fire source or other light sources of the wavelength in the range of 760nm - 1100 nm.
€10,00
(€12,10 Incl. tax)
Article code 104020000
€9,00
(€10,89 Incl. tax)
This Grove Voltage Divider provides an interface for measuring extern voltage. Read more
Voltage Divider
This Grove Voltage Divider provides an interface for measuring extern voltage.
€9,00
(€10,89 Incl. tax)
Article code 104020006
€6,00
(€7,26 Incl. tax)
Grove – LED Bar is comprised of a 10 segment LED gauge bar and an MY9221 LED controlling chip. It can be used for different applications. Read more
LED Bar
Grove – LED Bar is comprised of a 10 segment LED gauge bar and an MY9221 LED controlling chip. It can be used for different applications.
€6,00
(€7,26 Incl. tax)
Article code 107020000
€3,00
(€3,63 Incl. tax)
The Grove Buzzer is a simple yet enjoyable twig to use. The piezo can be connected to digital outputs and will emit a tone when the output is high. Read more
Buzzer
The Grove Buzzer is a simple yet enjoyable twig to use. The piezo can be connected to digital outputs and will emit a tone when the output is high.
€3,00
(€3,63 Incl. tax)
Article code 101020008
€7,50
(€9,08 Incl. tax)
This Moisture Sensor can be used to detect the moisture of soil or judge if there is water around the sensor. Let the plants in your garden notify you when they need human help. Read more
Moisture Sensor
This Moisture Sensor can be used to detect the moisture of soil or judge if there is water around the sensor. Let the plants in your garden notify you when they need human help.
€7,50
(€9,08 Incl. tax)
Article code 101020015
€6,00
(€7,26 Incl. tax)
The temperature sensor's operating range is -40ºC to 125ºC, with an accuracy of 1.5ºC. Read more
Temperature Sensor
The temperature sensor's operating range is -40ºC to 125ºC, with an accuracy of 1.5ºC.
€6,00
(€7,26 Incl. tax)
Article code 101020046
€9,00
(€10,89 Incl. tax)
The Hall Sensor measures the Hall Effect. Read more
Hall Sensor
The Hall Sensor measures the Hall Effect.
€9,00
(€10,89 Incl. tax)
Article code 104030003
€9,00
(€10,89 Incl. tax)
Grove - 4-Digit Display module is a 12-pin module. In this module, we utilize a TM1637 to scale down the number of controlling pins to 2. That is to say, it controls both the content and the luminance via only 2 digital pins of Arduino or Seeeduino. Read more
4-Digit Display
Grove - 4-Digit Display module is a 12-pin module. In this module, we utilize a TM1637 to scale down the number of controlling pins to 2. That is to say, it controls both the content and the luminance via only 2 digital pins of Arduino or Seeeduino.
€9,00
(€10,89 Incl. tax)
Article code 101020004
€4,25
(€5,14 Incl. tax)
This Grove – Switch is a mini SPDT slide, great for “ON/OFF” situations. Read more
Switch (P)
This Grove – Switch is a mini SPDT slide, great for “ON/OFF” situations.
€4,25
(€5,14 Incl. tax)
Article code 101020026
€6,00
(€7,26 Incl. tax)
The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side. Read more
Infrared Emitter
The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side.
€6,00
(€7,26 Incl. tax)
Article code 101020028
€9,00
(€10,89 Incl. tax)
Grove Joystick is a Grove compatible module which is very similar to the 'analog' joystick on PS2 (PlayStation 2) controllers. Read more
Joystick
Grove Joystick is a Grove compatible module which is very similar to the 'analog' joystick on PS2 (PlayStation 2) controllers.
€9,00
(€10,89 Incl. tax)