The ExpLoRer boards comes in two versions: The RN2483 version mainly for the European market and the RN2903 version for the US market. Please choose the right version from the above pull-down menu.
This is our brand new ExpLoRer board that we designed for Microchip. Please visit our SODAQ Support page to see the schematics and how to get started with the new ExpLoRer. By clicking here, you will be redirected to the page.
|Microcontroller||ATSAMD21J18, 32-Bit ARM Cortex M0+|
|Compatibility||Arduino M0 Compatible|
|Size||93 x 55 mm|
|Analog Output Pin||10-bit DAC|
|External Interrupts||Available on all pins|
|DC Current per I/O pin||7 mA|
|Flash Memory||256 KB and 4MB (external flash)|
|EEPROM||Up to 16KB by emulation|
|Clock Speed||48 MHz|
|Power||5V USB power and/or 3.7 LiPo battery|
|Charging||Solar charge controller, up to 500mA charge current|
|LED||RGB LED, Blue LED|
|LoRa||Microchip RN2483A Module|
|Bluetooth||Microchip RN4871 Module|
The ExpLoRer is a development/evaluation tool intended for the evaluation of Microchip wireless modules in a Research and Development laboratory environment. It is not a Finished Appliance. Manufacturers who integrate ExpLoRer in a Finished Appliance product must take responsibility to follow regulatory guidelines, for example for CE marking.