SODAQ ONE-US-RN2903-V3

€95,00 Incl. tax
Article number: 8719324913102
This is the US version (915MHz). For the European (868MHz) version click here.

Overview:

This is the third generation of our succesful SODAQ ONE board. It is equipped with a solar charge controller and runs on a LiPo or a permanent battery. It has the Ublox Eva 8M GPS module which is not only miniature but with it's assisted GPS feature it can get a fix within seconds. We've now added an extremely low power Accelerometer/Magnetometer. This gives the board a nifty feature where it can stay in (deep) sleep mode until it moves. An essential feature for developing low power devices.

Let's imagine you want to develop a bicycle tracker using the SODAQ ONE. You would like to track the position of the bike, but only when it has moved. This is possible if you keep the device in deep sleep until it detects motion. If the motion continues for a while, the bicycle may have changed position so only then the GPS will switch on to get a new reading and send this location over the LoRa network. Efficient right? This system will allow you make most efficient use of your battery capacity by only using the GPS when really needed, essentially increasing the battery life of your system.

The board is so small (45x25 mm) you can fit it inside almost anything (Seriously, look at the picture). To ease the development we have fitted two rows of headers so you can use it on a breadboard. Why? Well, it has 14 free I/O lines that you can use for your own purpose. Whether you want to build a weather station, control street lights or get a signal when you have received (snail) mail. It's all possible with the SODAQ ONE.
 
New in this version is that we have added JST headers (receptacles) so you can now directly plug in a LiPo battery and Solar Panel if you like.
 

 Here's an overview of the features:

Specifications  
Microcontroller ATSAMD21G18, 32-Bit ARM Cortex M0+
Compatibility

Arduino M0 Compatible

Size

45 x 25 mm

Operating Voltage

3.3V

I/O Pins

14, All can be used for digital and 12 log with PWM, UART, SPI and TWI (I2C)

Analog Output Pin

10-bit DAC

External Interrupts

Available on all pins

DC Current per I/O pin

7 mA

Flash Memory

256 KB

SRAM

32KB

EEPROM

Up to 16KB by emulation

Clock Speed

48 MHz

Debug 

Serial Wire Interface

Power

 5V USB power and/or 3.7 LiPo battery

Charging 

Solar charge controller, up to 500mA charge current

LED 

RGB LED

LoRa Microchip

RN2903A

GPS 

uBlox EVA 8M

Accelerometer/Magnetometer LSM303AGR
USB 

MicroUSB Port 

To view more information about the SODAQ ONE, such as how to get started and further specifications, visit our support page here

Intended use
The SODAQ ONE is a development/evaluation tool intended for the evaluation of Microchip wireless modules in a Research and Development laboratory environment. It is not a Finished Appliance. Manufacturers who integrate SODAQ ONE in a Finished Appliance must take responsibility to follow regulatory guidelines, for example for CE marking.

0 stars based on 0 reviews
By using our website, you agree to the usage of cookies to help us make this website better. Hide this message More on cookies »