RFBee

€35,10 Incl. tax
Article number: 113050002
Availability: In stock

Overview:

The RFBee is an RF module that provides reliable  and flexible wireless data transmission between devices. Based on an AVR Atmega168, it works as a fully functional Arduino connected via SPI to a TI CC1101 RF transceiver.

 

 

Application Ideas:

  • Robust RF control
  • Easy to implement of WSN (Wireless Sensor Network)

 

 

Features:

  • Range: indoor/Urban: up to 50m; Outdoor line-of-sight: up to 120m;
  • Receiver sensitivity: -95dBm
  • RF data transmission rate: 4,800bps; 76,800bps
  • Working frequency : 868MHz & 915MHz
  • Communication type: Point to Point, or Point to Multipoint.
  • Easy-to-Use serial interface and rich extendable ports
  • Easy-to-Use AT command: Set working mode, Serial Baud Rate, etc.
  • Open source hardware and firmware
  • Socket compatible with the Xbee, so you can plug it into any Xbee socket as a quick replacement.

 

 

Specifications:

Specifications Value
Microprocessor Atmega168
PCB size 24.38mmx32.94mmx0.8mm
Indicators No
Power supply 3.3V
IO counts 9
ADC input 7(6 multiplexing with IO)
Program interface USB
Connectivity Socket compatible with XBee
Communication Protocol Uart(TTL)
Operating Frequency Band ISM 868MHz & 915MHz
Outline Dimension 24.38mmx32.94mmx15mm

 

 

Electrical Characteristics:

Specification Min Typ Max Unit
Input voltage 3.0 3.3 3.6 VDC
Transmit Current   34.5   mA
Receive Current   18.1   mA
Idle Current   5.2   mA
Power-down Current   <0.3   mA
Operating Temperature -50   125 °C

 
 
Note: only the Rx, Tx, VCC, GND pins are identical to the Xbee. RFbee will not communicate with Xbee, so RFbee needs to be used on both ends of the wireless connection.

For more info click here
0 stars based on 0 reviews
By using our website, you agree to the usage of cookies to help us make this website better. Hide this message More on cookies »